MTN Electronics designed direct-thermal-path 20mm Triple Copper MCPCB for Cree XP series and Nichia 219/319 series emitters. This dual-channel design also allows you to run 3x Cree XQ-E emitters for a secondary color channel.
This MCPCB is designed for parallel use only, so there are no jumpers or bridging required for most triple applications. To run all three secondary XQ-E LEDs, you must bridge the jumper pads.
The three large LED pads have an asterisk symbol "*". This denotes the negative - side of the LED. For the three smaller XQ pads, the asterisk "*" symbol also denotes the negative side of the LED (use "2-" for the negative connection on these LEDs; common positive).
We will reflow any (3) in-stock bare XP-G2/G3, Nichia 219/319, or XP-L HI / XP-L2 LEDs onto this MCPCB, as long as they are LEDs that are not currently available on this MCPCB (for example: Nichia 219C D240 4000K are already available, so we would not reflow those).
If you purchase multiple bare LEDs, please indicate which you would like to be reflowed in your order checkout comments.
Add Wires Service
For an additional fee, we will solder a pair of 22 AWG tinned copper silicone wires to your MCPCB (only if LEDs are being reflowed!).