From this listing you can choose from any of the available listed LEDs and we will reflow them to th..
$4.25
This board is used to adapt a smaller driver (such as the 17mm H17Fx) into a 20mm driver cavity..
$0.59
AR coated glass lens, 99% transmittence. Great for 20mm triple builds or any of the Convoy S2, S3, e..
$2.45
This forward clicky switch is ready to run, with a pre-soldered spring and PCB. This switch is..
$2.85
This MCPCB is what you want for high-performance 12V XHP70 action! Direct-thermal-path copper ..
$2.85
MTN Electronics designed direct-thermal-path 20mm Quad Copper MCPCB for Cree XP series and Nichia 21..
$2.95
MTN Electronics designed direct-thermal-path 20mm Triple Copper MCPCB for the Oslon Flat White ..
$2.90
MTN Electronics designed direct-thermal-path 20mm Triple Copper MCPCB for Cree XP series and Nichia ..
$2.90
This is the highest performance 20mm buck driver currently available. It can drive a 3V LED wi..
$18.95
Sapphire lenses are some of the clearest and most durable lenses available and are a great upgrade f..
$5.95
This is the bare PCB you need to build your own 20mm FET driver with an LDO as well (used for 2S+ in..
$1.10
This is the bare PCB you need to build your own 20mm FET driver! DIY parts kit available here...
$1.10
This is the bare PCB you need to build your own 20mm FET+7135 driver! DIY parts kit avail..
$1.10
This LED is specifically designed to be in the nominal 660nm wavelength range. This Cree XP-E ..
$6.05
This is the newest generation XP-E2 on a direct thermal path copper MCPCB (Noctigon or MTN).
..
$6.50
Great for situations where night vision may be overly affected by white light. This is th..
$6.50
Great for situations where night vision may be overly affected by white light. This is th..
$6.00
This is the newest generation XP-E2 on a direct thermal path copper MCPCB.
PC Amber has..
$6.50
Great for situations where night vision may be overly affected by white light.
CREE XP-E Red..
$2.49
Great for situations where night vision may be overly affected by white light. This is th..
$6.25
This is the newest generation XP-E2 on a Noctigon direct thermal path copper MCPCB.
CREE XP-..
$6.50
You can choose which direct-thermal-path copper MCPCB size you would like this LED on. Please ..
$3.79
You can choose which direct-thermal-path copper MCPCB size you would like this LED on. Please ..
$6.89
You can choose which direct-thermal-path copper MCPCB size you would like this LED on. Please ..
$6.89
The XP-L2 has an extremely low forward voltage, so with an FET driver it will pull a LOT of current...
$6.59