Categories
Home » Atmel attiny85 20SU MCU

Atmel attiny85 20SU MCU

Atmel attiny85 20SU MCU
Product Code: ATTINY85-20SU
Availability: 35
Price: $1.60

5 or more $1.45


Available Options


* attiny85 Program:

Qty:     - OR -   Add to Wish List
Add to Compare

This MCU is being used for some of the new advanced firmwares.  The attiny85 SU has a slightly wider profile, so it won't fit on most existing attiny13a/attiny25 drivers without some modification.  The legs can be bent inwards to make this MCU fit on existing drivers, or drivers with a wider pad profile can be used.

This driver can only reliably run down to 2.7V, so set your low voltage protection accordingly (you shouldn't need to ever run much lower than that anyways with a single lithium-ion cell).

FIRMWARE PROGRAMMING OPTIONS (Clicky)

No clicky firmware options currently available. 

FET+7135 FIRMWARE PROGAMMING OPTIONS (Momentary / E. Switch)

1. D4 UI V2

This momentary firmware is an offshoot of Narsil, modfied by Tom E. & ToyKeeper especially for the popular Emisar D4 Flashlight.  This firmware is open source, available here. 

Default Pin Assignments:
2 - E.Switch (other side of switch connects to ground)
5 - 7135 PWM
6 - FET PWM

Features:

  • Ramping (click and hold)
  • Tactical Mode (click four times to toggle between tactical and ramping)
  • Instant Full Power (double click)
  • Lock Out (click six times)
  • Beacon (click eight times)
  • Battery Level Readout (click three times)
  • Low Voltage Protection 
  • Thermal Protection

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Continue


© Mountain Electronics LLC