The second generation of multi-die high-output LEDs is here!  These are all mounted on a direct-thermal-path copper MCPCB.  

You may choose between 6V and 12V MCPCBs.  All MCPCBs are copper direct-thermal-path.

Please note that the XHP50.2 has an extremely low forward voltage.  It may be damaged by use with an FET driver and high-drain 18650/26650 batteries!  Generally, 2x18350 is fine.  You may have to add resistance through thinner wires, weaker cells, etc. to use a single XHP50.2 with an FET driver!

• 6V MCPCBs:
  • 16mm & 20mm: MTN / Noctigon
  • 10mm: Sinkpad
  • 25mm:  MTN
  • 31.5mm:  Maxtoch
• 12V MCPCB:
  • 20mm Sinkpad

Specifications:

• Tint: 6500 Kelvin
• Output Bin: J4
• Manufacturer's Rated Drive Current: 3A (6V); 1.5A (12V)
  • Can be overdriven on the 16mm+ DTP MCPCBs with proper heatsinking!