MTN Electronics designed direct-thermal-path 20mm Triple Copper MCPCB for Cree XP series and Nichia 219/319 series emitters. This dual-channel design also allows you to run 2x Cree XQ-E emitters for a secondary color channel.
This MCPCB is designed for parallel use only, so there are no jumpers or bridging required for most triple applications. If you need to individually address emitters or run in series configuration, please use the Noctigon 3XP MCPCB.
The three large LED pads have an asterisk symbol "*". This denotes the negative - side of the LED. For the two smaller XQ pads, negative faces the outside of the MCPCB and positive faces the inside (use "2-" for the negative connection on these LEDs; common positive).
We will reflow any (3) in-stock bare XP-G2/G3, Nichia 219/319, or XP-L HI / XP-L2 LEDs onto this MCPCB.
If you purchase multiple bare LEDs, please indicate which you would like to be reflowed in your order checkout comments. Please also designate in what configuration you would like the LEDs to be reflowed (parallel or series---if we do not receive a checkout comment, we will assume parallel, since this is the most common designation).
Add Wires Service
For an additional fee, we will solder a pair of 22 AWG tinned copper silicone wires to your MCPCB (only if LEDs are being reflowed!).