This host is designed to be built into a triple LED light using a 3XP MCPCB and Carclo 105xx series optics. It has a nice thick aluminum thermal shelf and nice machining and anodizing.
You must add your own MCPCB/LEDs, driver, and optic---they are not included.
A few things to keep in mind before ordering this host:
- The pre-drilled wire hole is too small to fit 2x 22AWG silicone wires. We usually enlarge our hole slightly so they will fit, but you could also go to thinner wires.
- The tailcap spring is not bypassed and should be bypassed if the light is to be used with any current above approximately 3.5A.
- The MCPCB opening is a very round ~20mm: this means that most 3XP MCPCBs, including the Noctigon 3XP MCPCB, must be sanded in order to fit.
- You must use the included AR glass lens on top of the Carclo optic.
- Utilizes a 3XP MCPCB
- Reverse-clicky Switch
- Uses 1x 18650 battery
- Driver Diameter: 17mm
- AR Lens
- MCPCB Diameter: 20mm 3XP
- Includes Lanyard
- Diameter: 24mm
- Length: 119mm
- Weight: 70g